Color meter CM-15P for quality control black and white calibration
determination of reference values and samples
Color meter CM-15P for quality control
black and white calibration determination of reference values and samples / white calibration /
3.5" touch screen
The color meter and spectrophotometer CM-15P was developed for
quality control, offers a high accuracy and comes with a 3.5" touch
screen display. When using the color meter, you can choose between
different color spaces (CIE LAB, XYZ, Yxy, LCh, LUV, HunterLAB).
After a measurement with the color meter, the reading can be used
as a reference value while other readings can be recorded as a
sample and later be compared to the reference value easily.
In addition to the individual color space coordinates, the
deviation between the reading is also displayed. When using the
color meter, it is possible to store up to 1000 reference values
and up to 10000 samples on the device. The measured data can also
be transferred to a PC via the USB interface. A special PC software
is included in the package.
- CIE LAB, XYZ, Yxy, LCh, LUV, HunterLAB
- black and white calibration
- determination of reference values and samples
- 3.5" touch screen display
- 45/0 geometry for optics
- rechargeable lithium-ion battery
- high accuracy
- easy to use
- incl. PC software
1.Specification
| Measuring geometry | 45/0 according to CIE No. 15, GB/T3987 |
| Integrating sphere | Ø 58 mm |
| Sensor | Silicon photoelectric diode |
| Wavelength range | 400 ... 700 nm (10 nm pitch) |
| Measuring aperture | Ø 8 mm |
| Color spaces | CIE LAB, XYZ, Yxy, LCh, LUV, HunterLAB |
| Color index | ΔE*ab, ΔE*uv, ΔE*94, ΔE*cmc(2:1), ΔE*cmc(1:1), ΔE*00, ΔE(h) |
| Chromacity data | WI (ASTM E313 CIE/ISO, AATCC, Hunter)
YI (ASTM D1925, ASTM E313)
TI (ASTM E313, CIE/ISO)
Metamerism Index Mt
color stain, color fastness |
| Observation angle | 2° / 10° |
| Light source | D65, A, C, D50, D55, D75, F2, F6, F7, F8, F10, F11, F12 |
| Light source device | combined LED |
| Life of light source | 5 years, > 1.6 million measurements |
| Data on display | Spectral value/graph
colorimetric value
color difference (value/graph)
PASS/FAIL result
color offset
color simulation |
| Min. time between 2 measurements | 1.5 seconds |
| Repeatability | Standard deviation ~ 0.1 % (400...700 nm: ~0.2 %)
colorimetric value: standard deviation: ΔE*ab 0.04 |
| Error between 2 measurements | ΔE*ab 0.02 |
| Display | 3.5" TFT touch screen |
| Interface | USB |
| Storage | 1,000 reference values, 10,000 samples |
| Power supply | Rechargeable lithium-ion battery |
| Operating conditions | 0 ... +40 °C / 32 ... 104°F
0 ... 85 % RH |
| Storage conditions | -20 ... +50 °C / -4 ... 122 °F |
| Dimensions | 90 x 77 x 230 mm / 3.5 x 3.03 x 9.05 in |
| Weight | 600 g / 21.1 oz |
2.Standard accessory
1 x Colorimeter CM-15P
1 x Aluminium carrying case
1 x Mains adapter
1 x Lithium-ion battery
1 x Calibration plate (white)
1 x Calibration plate (black)
1 x Protective cover
1 x USB cable
1 x Wrist band
1 x PC software
1 x Instruction manual
